 |
 |
 |
|
Made
in USA CMS spun aluminum heat treated heavy duty dune buggy .190 wheels
for VW Volkswagen sandrails, manx, sand cars, rails and woodsbuggy.
This Cms spun aluminum wheel is used when trying to maximize weight
reduction while increasing the horsepower to weight ratio. This is a 2
piece welded wheel with 2 inch or 3.5 inch back spacing offset. It is
standard in the sand buggy industry to use the terms minimum (2.5 inch)
and standard offset (3.5 inch). Some front disc brake kits using stock
style VW Volkswagen calipers will not work with these wheels. The
caliper can not stick out past the facing of the rotor where the wheel
bolts on. Inside wheel offset or backspacing almost never exceeds 4.5
inches in VW applications due to clearance issues. It is much more
common to see 1.75, 2.5 and 3.5 inch wheel offset backspacing.
If you need special offsets and widths, click here to see our bolt together wheels and welded wheels.
Wheels are polished and may have superficial scratches due to handling.
Most customers are fine with the polish but there is always whiner in
the crowd. If you are trying to build a show car, you may have to get
them repolished if you are trying to build a concourse car. Most wheel
halves are in stock and can be assembled within a week. They are locally
made and can take 1 to 3 weeks to make if the half is out of stock due
the heat treating and polishing process. You can always email or call us
and will check to see what halves are in stock. Wheel patterns other
than VW 4 on 130 are special order and may not be returned. Other special order wheel patterns are 5 on 130 porsche bolt pattern, 5 on 112 Late VW Bus bolt pattern, 5 on 4.75 Chevy, 5 on 4.5 Ford, 5 on 5.5 Ford, 5 on 5.5 Jeep, 6 on 5.5 Military
|
|
|
 |
|
 |
|