Home > Suspension Rear > Trailing Arms Rear >

3X3 IRS boxed rear trailing arms for VW Volkswagen (pair)
3X3 trailing rear arms 17-2706 17-2705 17-2790 boxed 930 porsche or bus cv joint axle kit empi 20 1/4 19 1/4 boots, flanges, bolts, grease for off-road buggies and bajas. 4 inches of travel to a whopping 14 inches. These 3X3 IRS trailing arms made for off
 
Alternative Views:



Product Code: AC530015E

Trailing arms options

3X3 hardware options: 		3x3 mild steel standard welding (imported) 530015E [Add $385.00]
3x3 mild steel with upgraded welding and reinforced (imported) 530015 [Add $440.00]
Trailing arm parts 1

3X3 hardware options 1: 		Add urethane pivot bushings (pair) 16-5122 [Add $19.00]

3X3 hardware options 2: 		Add 4 wheel bearing grease seals and gaskets 311598051B 113501315H [Add $14.00]

3X3 hardware options 3: 		Add inner and outer wheel bearings(4 pcs) 113501277A 113501283 [Add $36.00]

3X3 hardware options 4: 		Add axle bearing spacers (6 pcs) 16-2400 [Add $40.00]

3X3 hardware options 5: 		Add bearing snap rings (2 pcs) AC530028 [Add $6.00]

3X3 hardware options 6: 		Add IRS bearing caps (2 pcs) 17-2699 [Add $50.00]
Transmission drive flanges (pair)

Forged chromoly flanges 1: 		Type 1 IRS transmission with Type 2 CV flanges and 8mm threaded bolt holes (same as Thing) 16-2299 [Add $101.00]

Forged chromoly flanges 3: 		Type 1 IRS transmission with Porsche 930 CV flanges and 3/8-24 threaded bolt holes 16-2301 [Add $101.00]

Forged chromoly flanges 4: 		002 Type 2 IRS transmission with Porsche 930 CV flanges and 3/8-24 threaded bolt holes 16-2302 [Add $101.00]

Forged chromoly flanges 5: 		091 Type 2 IRS transmission with Porsche 930 CV flanges and 3/8-24 threaded bolt holes 16-2303 [Add $101.00]
Chromoly stub axles (pair)

Forged stub axle options 1: 		Type 1 stub axles with Type 2 CV flanges and 8mm threaded bolt holes (same as Thing) 16-2304 [Add $209.00]

Forged stub axle options 3: 		Type 1 stub axles with Porsche 930 CV flanges and 3/8-24 threaded bolt holes 16-2306 [Add $209.00]

Qty:  
Description
 
These 3X3 IRS rear trailing arms made for off-road buggies and VW Volkswagen bajas. These arms will replace the stock factory trailing arms and increase the length and width by 3 inches. They are designed to use the stock IRS rear wheel bearings, bearing spacers, bearing caps and stub axles. There are also optional stub axles that utilize Bus or 930 Porsche CV joints which allow more axle angle for maximum wheel travel. This set up will let you go from 4 inches of travel to a whopping 14 inches. If you want to drive faster through the whoops and stay in control, you need suspension travel. Longer axles, performance CV joints and 3X3 are just what doctor ordered to get you on the road to baja.


Browse for more products in the same category as this item:

Suspension Rear > Trailing Arms Rear
Suspension Rear
Suspension Rear > Wheel Bearings & Hardware
Suspension Rear > Spring Plate Conversions
Suspension Rear > Spring Plates, Bushings & Caps
Suspension Rear > C.V. Joints & Axle Boots
Suspension Rear > Axles, Drive Flanges & Torsion Bars